ITC’s High Power (up to 30 Amps.) Temperature Control Systems are uniquely engineered to control mold temperature for 1 to 6 zone application without the need for special temperature control modules. The Main Features of High Power Main Frame systems (MFHP-30) are:
MFHP-1-130
Input Voltage: 240vac, 1 Phase, 50/60Hz
Heater Voltage: 240vac, Single Phase
Circuit Breaker: (1) @ 30 Amps
Max. Amps per Zone: 30 Amps
Total System Watts: 12,470 Watts
STANDARD ACCESSORIES:
Mold Power & T/C Cable: (1) PTCHP1-10 or 20 (Combination Power & T/C)
Mold Power & T/C Connector: (1) MPTCHP-1 (Combination Power & T/C)
Floor Stand: PFS-8
Module: UATC-20 or S20-D3C
Option: Remote Alarm Circuitry – Only available with UATC-20 Module
MFHP-3-150
Input Voltage: 240vac, 3 Phase, 50/60Hz
Heater Voltage: 240vac, Single Phase
Circuit Breaker: (1) @ 50 Amps
Max. Amps per Zone: 30 Amps
Total System Watts: 29,097 Watts
STANDARD ACCESSORIES:
Mold Power & T/C Cable: (1) PWCHP3-10 or 20 | (1) THC5-10 or 20
Mold Power & T/C Connector: (1) MPCHP-3 | (1) MTC-5
Floor Stand: PFS-5
Module: UATC-20 or S20-D3C
Option: Remote Alarm Circuitry – Only available with UATC-20 Module
MFHP-6-1100
Input Voltage: 240vac, 3 Phase, 50/60Hz
Heater Voltage: 240vac, Single Phase
Circuit Breaker: (1) @ 100 Amps
Max. Amps per Zone: 30 Amps
Total System Watts: 41,568 Watts
STANDARD ACCESSORIES:
Mold Power & T/C Cable: (1) PWCHP6-10 or 20 | (1) THC8-10 or 20
Mold Power & T/C Connector: (1) MPCHP-6 | (1) MTC-8
Floor Stand: (2) PFS-8
Module: UATC-20 or S20-D3C
Option: Remote Alarm Circuitry – Only available with UATC-20 Module
* Specifications may change without notice