|
ITC's High Power (up to 30 Amps.)
Temperature Control Systems are uniquely engineered to control mold temperature
for 1 to 6 zone application without the need for special temperature control
modules. The Main Features
of High Power Main Frame systems (MFHP-30) are:
- Uses Standard Temperature Modules (S20-D3C
or UTC-20
) which are
used for our 15 Amp. system. This eliminate the need of high amperage
modules. Using one style modules for 15 Amp. and 30 Amp. system will give
you following benefits :
- Eliminate the need for special double wide, high cost control modules.
- Reduce the possible system damage due to inserting wrong module in
main frame slot.
- Reduce total system cost and inventory cost.
- Full Load Capacity High Power main frames are designed to operate
under full load capacity. This means Sequential Startup is not required.
- Amperage Display The heater amperage draw for each zone can checked
by turning the selector switch to appropriate zone and pressing the amp
button next to it. The display will indicate amperage draw for the selected
zone. This feature allows to use control modules without amperage readout.
- Easy Installation All 30 Amp. (High Power) main frames are
completely self contained and easy to install. Hook the main power, 240 VAC,
and attach mold power and thermocouple cables to main frame.
- Protection Each heater zone is protected by pair of 30 Amp. fuses
and the main frame is equipped with appropriate circuit breaker.
- Anti-Arching This feature is designed in the main frame to protect
damage to both, main frame and module, in an event a module is inadvertently
removed while under load. This feature will function only in newer ITC
control modules, which are equipped with modified circuitry.
- Phase Indicators, indicate which leg has power. High Power main frames are
configured to fit our regular stands and can be tied together with our
standard 15 Amp. main frame.
|
|
High Power
30 Amp. Main Frames Index