Refer the following table for correct part you need and call factory or
your local distributor for pricing.
| Part Number |
Description |
Purpose |
Picture |
| MEK-5TC |
Mold Connector End Kit for 5 Zone Thermocouple Cable |
To connect thermocouple cable to mold thermocouple connector
on mold (MTC-5) |
 |
| MEK-8TC |
Mold Connector End Kit for 8 Zone Thermocouple Cable |
To connect thermocouple cable to mold thermocouple connector
on mold (MTC-8) |
| MEK-12TC |
Mold Connector End Kit for 12 Zone Thermocouple Cable |
To connect thermocouple cable to mold thermocouple connector
on mold (MTC-12) |
| MEK-PR |
Mold Power Cable End Kit (Female) for 5, 8 & 12 Zone
Power Cables |
To connect power cable to mold power connector on the mold (MPC) |
 |
| FEK-PR |
Frame Power Cable End Kit (Male) for 5, 8 & 12 Zone
Power Cables |
To connect power cable to the main frame power connector on
the main frame (FCK-PR) |
 |
| FEK-TC |
Frame Thermocouple Cable End Kit (Female) for 5, 8 & 12
Zone Thermocouple Cables |
To connect thermocouple cable to main frame thermocouple
connector mounted on main frame |
|
| FCK-PR |
Main Frame Power Connector (Female) for 5, 8 & 12 Zone
Power Cables |
Mounts on side of main frame & latches to the main frame
power cable end kit (FEK-PR) |
 |
| FCK-TC |
Main Frame Thermocouple Connector (Male) for 5, 8 & 12
Zone Power Cables |
Mounts on side of main frame & latches to the main frame
thermocouple cable end kit (FEK-TC) |
 |
| MF-EC |
Card Edge Connector Kit (For all ITC main frame &
modules) Located on connector mounting plate MF-CPM |
To accept the contacts on the control module for power
connection and data transfer between mold heater, thermocouple &
control module |
 |
| MF-ECC |
Card Edge Connector Contact (For all ITC main frame &
modules) |
To make contact with control module (Slips into card edge
connector MF-EC) |
| MFIPC-10 |
10' Main Frame Input Poser Cord |
To supply 240 V power to main frame from power source. (8/4
SO Cord with ends) |
|
| MFIPC-20 |
20' Main Frame Input Poser Cord |
To supply 240 V power to main frame from power source. (8/4
SO Cord with ends) |
|
